X2CrNiMoN17-11-2

1.4406, X2CrNiMoN17.11.2, X2CrNiMoN17.11.2, 1.4406, X2CrNiMoN17.11.2, 1.4406, X2CrNiMoN17.11.2,

C	Si	Mn	P	S	Cr	Mo	Ni	N
≤0.030	≤1.00	≤2.00	≤0.045	≤0.030	16.5-18.5	2.00-2.50	10.0-12.0	0.12-0.22

DIN EN 10088-1 - Stainless steels - Part 1: List of stainless steels
DIN EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
DIN EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
DIN EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
DIN EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
DIN 17440 (1975) - Stainless steels - Technical delivery conditions for drawn wire
DIN 17441 (1997) - Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes
DIN 17440 (1996) - Stainless steels - Technical delivery conditions for drawn wire
DIN EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
DIN EN 10222-5 - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
DIN EN 10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
DIN EN 10272 - Stainless steel bars for pressure purposes

热处理	最小值	最大值	近似值	备注

热处理	最小值	最大值	近似值	备注

热处理	最小值	最大值	近似值	备注

热处理	最小值	最大值	近似值	备注

热处理	最小值	最大值	近似值	备注

热处理	Type	最小值	最大值	近似值	备注

DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels; Replaced by DIN EN 10263-5:2002